uPVC Tilt and Turn Windows in South London and Surrey
Some windows look good but are a nuisance to live with. Tilt and turn windows are the opposite. They open two ways, they’re easy to clean from inside, and they seal tightly when closed.
At Glitz Windows & Doors, we supply and fit uPVC tilt and turn windows for homes across South London and Surrey. We’re a family-run company based in Coulsdon, with more than 25 years’ experience. We measure, make, fit and stand behind every installation ourselves.
What Are uPVC Tilt and Turn Windows?
A tilt and turn window has one handle and two ways of opening. Turn the handle to the side and the sash swings inwards like a door. Turn it upwards and the top tilts inwards, leaving a gap for fresh air while the window stays secure.
The tilt is what makes them popular. You can air a bedroom overnight or leave the kitchen window slightly open when you go out, without a wide opening for anyone to use.
Tilt and turn upvc windows are common in European homes and have become a favourite in the UK, especially for flats, first-floor rooms and any window that’s awkward to reach and clean.
Why Choose uPVC Tilt and Turn Windows?
Two Ways to Open
Tilt for gentle ventilation, turn for full opening. One window does the work of two, and the fully open position gives a wide, clear view and a proper breeze on a warm day.
Easy to Clean
When the sash is turned inwards, the outside of the glass is within reach from inside the room. That’s a real help on upper floors, where cleaning normally means ladders or paying a window cleaner.
Secure by Design
Tilt and turn windows lock at several points around the frame, not just at one handle. Toughened glass and other security options are available, and our installations meet Part Q of the Building Regulations for security.
Warm, Quiet and Efficient
The sash closes firmly against the frame with a compression seal all the way round. Paired with A-rated double glazing (or triple glazing where it’s worth it), that means fewer draughts, lower heat loss and less noise from the road.
Low Maintenance
uPVC doesn’t rot, rust or need repainting. A wipe with warm soapy water keeps it looking fresh, and the frames hold their colour well.
uPVC Tilt and Turn Window Installation
A good window only performs well if it’s fitted well. As a local uPVC tilt and turn windows installer, we handle each step ourselves, so you talk to the same team from first call to final check.
- Free survey and measuring. We visit, measure every opening and talk through styles, glazing and colours. You get a clear written quote, with no pressure to go ahead.
- Made to measure. Your windows are manufactured to your exact sizes. We’ll give you a realistic lead time upfront so you can plan around the work.
- Fitting day. Most standard window replacements take a single day. Larger jobs, like whole-house re-glazing, usually take a few days, and we’ll set out the timeline before we start. We protect your floors, keep mess to a minimum and clear up before we leave.
- Final checks. We test every window, adjust the hardware and show you how the tilt and turn action works.
- Certificate and guarantee. As FENSA-registered installers, we register the work and your certificate comes to you. Keep it safe, as you’ll need it when you sell your home. Every installation is also covered by our 10-year guarantee.
uPVC Tilt and Turn Windows Replacement
If your current windows are draughty, misting up, hard to open or just tired, replacement is one of the most noticeable upgrades you can make. Homeowners usually see warmer rooms, less condensation, better security and a much fresher look from the street.
We can swap old timber, aluminium or first-generation uPVC windows for new tilt and turn upvc windows. You can replace a single window or the whole house, and we’ll keep the styles consistent so it all looks right together.
One thing worth knowing: tilt and turn sashes open inwards, so you’ll need a little clear space in front of the window. It’s worth thinking about deep windowsills, radiators and blinds. We’ll check this at the survey and tell you if another style, such as a casement or flush sash window, would suit the room better.
uPVC Tilt and Turn Windows Repair
You don’t always need new windows. If the frames are in good condition, a repair can be far more affordable. We can usually sort out:
- Misted or failed double-glazed units, by replacing the sealed unit and keeping your frame
- Stiff, loose or broken handles and locking mechanisms
- Worn hinges or a sash that has dropped and rubs on the frame
- Tired seals and draughts
- Tilt and turn windows that won’t switch between modes
If the frames are cracked, warped or very old, we’ll tell you honestly and talk you through your replacement options instead.
How Much Do uPVC Tilt and Turn Windows Cost?
The cost of tilt and turn upvc windows depends on a few things:
- The number and size of windows
- Colour and finish (white is usually the most affordable, woodgrain and dual colour cost more)
- Glazing specification, such as double or triple glazing, and any obscure or toughened glass
- Whether you’re doing a single window, a few rooms or the whole house
- Any extras, like new sills, trims or specialist hardware
As a rule, tilt and turn windows cost a little more than a standard casement, because the hardware is more complex. uPVC is generally more affordable than aluminium or timber.
Because every home is different, we don’t quote from a price list. After a free survey, you’ll get an itemised written quote showing exactly what you’re paying for, so upvc tilt and turn windows prices are clear before you commit.
Why Homeowners Choose Glitz Windows & Doors
25+ years' experience
We've fitted windows in everything from Victorian terraces to 1930s semis and modern flats, so we know what works on each.
FENSA-registered
Your installation meets Building Regulations and you'll receive an official certificate.
10-year guarantee
Every installation is covered for a decade.
Honest quotes
Free measuring, itemised pricing and no pressure.
A local team
You speak to the people who do the work, not a call centre, and we're close enough to come back quickly if something needs attention.
What Our Customers Says About Us
uPVC Tilt and Turn Windows FAQs
How do tilt and turn windows work?
A single handle controls both modes. Turn it sideways and the whole sash opens inwards like a door. Turn it upwards and the top of the sash tilts in for ventilation while the window stays locked at the bottom.
How much do uPVC tilt and turn windows cost?
It depends on the size, quantity, colour and glazing. They usually cost slightly more than standard casement windows and less than aluminium. Book a free survey for an itemised quote.
How long does installation take?
Most standard window replacements take a single day. A full house can take a few days. We’ll agree the timeline with you before we start.
Are tilt and turn windows secure?
Yes. They lock at multiple points around the frame, and toughened glass options are available. Because the tilt position opens only a small gap, they’re also a safe way to ventilate.
Do I need a FENSA certificate?
You’ll need one when you sell your home. We’re FENSA-registered, so we register your installation and send you the certificate.
uPVC Tilt and Turn Window Installation, Repairs & Replacement
Need uPVC Tilt and Turn Window Services in South London & Surrey?
Whether you’re installing new uPVC Tilt and Turn Window , replacing old ones or need a repair, our team is here to help.
Other uPVC Window Styles We Offer
Make Appointment
Get a free quote with no obligation - Contact us now
Have a unique idea or specific requirements? Our team specialises in tailored window and door solutions to suit your vision—built to exact specifications and installed with precision.
- 53 Chipstead Valley Rd, Coulsdon CR5 2RB
- info@glitzwindows.co.uk
- 020 3370 7955
- Mon-Fri 08:00 - 17:00